Takoma Park, MD · Refinishing & sanding
Hardwood refinishing & sanding in Takoma Park, MD
Dust-contained sanding, stain sampled on your actual floor, and finishes chosen for how your family lives. The best value upgrade in Takoma Park real estate.
Get refinishing pricing · (240) 343-3514
Full sand or screen-and-recoat? We'll tell you honestly
Half the "refinishing" calls we get in Takoma Park don't need a full sand. If your finish is dull and scratched but not worn through to raw wood, a screen-and-recoat refreshes it at roughly a third of the price. If boards are gray, cupped, or bare in traffic lanes, sanding is the real fix. The water-drop test at your estimate settles it in thirty seconds, and we quote whichever your floor actually needs.
Refinishing is the strongest work we do in Takoma Park, and often more valuable than replacement: original late-1800s and early-1900s hardwood that looks ruined under carpet routinely finishes beautifully because the carpet protected it for decades. Antique heart pine and old softwood we sand at slower feed rates with frequent paper changes so the resin-heavy grain glows instead of scorching. Homeowners here overwhelmingly want matte and satin waterborne finishes that read period-original, not glossy.
Stains and sheens Takoma Park homeowners are choosing
Sampled as large swatches on your floor before you commit, because stain reads differently on every house's wood.
Cost to refinish hardwood floors in Takoma Park, MD
Per-square-foot ranges typical for Montgomery County. Furniture moving, shoe-base removal, and stair work quoted as visible line items.
A Takoma Park refinish, day by day
Day 1: Containment and rough sanding
Doorways and HVAC returns sealed, vacuum-contained machines take the old finish to clean wood.
Day 2: Fine sanding and stain
Progressively finer grits, hand-detailed edges and corners, water-pop, and your sampled stain applied.
Days 3-4: Finish coats
Three coats with abrading between. Light foot traffic 24 hours after the final coat.
Day 5+: Cure and move-back
Furniture without rugs at 72 hours, rugs at two weeks. The full schedule is written into your quote.
Refinishing questions from Takoma Park homeowners
What does it cost to refinish hardwood floors in Takoma Park?
$3.75-$6.25 per sq ft depending on stain and finish system. A typical 800 sq ft Takoma Park main level runs $3,200-$4,600. If your finish is worn but not through to bare wood, a screen-and-recoat at $1.5-$2.25 per sq ft may be all you need, and we'll tell you when it is.
Is your sanding really dustless?
Industry-honest answer: it's dust-contained, not dust-free. Our machines run sealed vacuum containment that captures the overwhelming majority of dust at the drum, we seal doorways and HVAC returns, and Takoma Park clients routinely stay in the home during sanding. You will not be wiping oak dust off shelves for a month.
How many times can my Takoma Park floors be sanded?
Solid ¾" hardwood takes 4-6 sandings over its life; engineered floors depend entirely on wear-layer thickness. Takoma Park's historic district is rich in Queen Anne, Stick Style, Shingle Style, Craftsman, and bungalow houses from the late 1800s and early 1900s, most still holding original old-growth hardwood — often beneath later carpet — that is worth far more restored than replaced. Before quoting a full sand we measure remaining wood above the tongue at a vent or closet, so you never pay to sand a floor that can't take it.
How long until we can walk on the floors and move furniture back?
Waterborne finishes: light foot traffic in 24 hours, furniture (no rugs) at 72 hours, rugs at 2 weeks. Oil-based adds a day at each step. A standard Takoma Park refinish is a 3-5 day job door to door, and we put the cure schedule in writing on day one.
More flooring services in Takoma Park, MD
One licensed local crew for everything underfoot in Takoma Park: hardwood, luxury vinyl, stairs, and rescue work — each with pricing calibrated to Montgomery County.